SORRCA Points Calculator

Truggy and Back Halved Truck Specifications

Must replace the ladder frame behind the cab with tube, and must extend past the rear axle pumpkin to be legal. The bed must have a roll bar hoop and integrated shock mounts. It also must be a structural part of the rear of the vehicle. (If your bed does not meet ALL of the preceding criteria, it does not count as a truggy bed).Tube bed, roll bar, shock mount points not available in addition to truggy bed points.

Tube Frame Truck (tuber):

Tuber:

Metal (-8)

Plastic (-4)

Rigid metal/plastic body panels:

(-1)

Tuber Specifications

A tuber consists of a complete body structure where the front, cab, and rear sections are comprised entirely of structural tubework. Tube bed, roll bar, internal cage, and shock mounts points not available in addition to tuber points.

Interior cage or exo-cage:

Front Seats:

Metal (-3)

Plastic (-1)

Rear Seats:

Metal (-3)

Plastic (-1)

Third Row:

Metal (-3)

Plastic (-1)

Interior cage or exo-cage

(-3 metal -1 plastic) per row of seats or area where seats would be (vehicle doesn't need an interior to get these points). Cage must have down bars and cross bars in front and behind each row. Not available to tubers.

Tube accessories:

Sliders (both sides):

Metal (-3)

Plastic (-1)

Integrated tube shock mounts (per pair):

Metal (-1)

Body:

Hard Body:

Full (-8)

Cab (-4)

Drop Bed:

(-3)

Inner Fenders:

(-1 Per Pair)

Complete Custom Build Body:

Full (-4)

Cab (-2)

Complete custom built body

Must be metal or hard plastic, no lexan: full -4, Cab -2 (in addition to hard body points)

Bumpers:

Front Bumper:

Metal (-3)

Plastic (-1)

Rear Bumper:

Metal (-3)

Plastic (-1)

Stinger/Grill Guard:

(-1)

Bumpers

Must be chassis mounted and separate from the body

Exterior Roof Rack / Light Bar:

Roof Rack:

Metal (-2)

Plastic (-1)

Rooftop Light Bar:

Metal (-1)

Interior:

2D/Half Interior:

4 Seats (-3)

2 Seats/Bench (-2)

1 Seat (-1)

3D Interior:

4 Seats (-5)

2 Seats/Bench (-4)

1 Seat (-3)

SUV Cargo Area (-1)

3D Interior

Any 3D interior must include: seat, dash, steering wheel and floor.

Realistic Scale Human Figures:

Driver:

Complete Figure (-4)

Knees up (-3)

Torso up (-2)

Head with Arms (-1)

Passenger:

Complete Figure (-4)

Knees up (-3)

Torso up (-2)

Head with Arms (-1)

3rd Passenger (Kids OK) -1

4th Passenger (Kids OK) -1

Realistic Scale Human Figures

Points awarded for up to 2 adult sized figures, and only if accompanied by an interior.

Suspension, Drivetrain, Steering:

3D Engine:

(-4)

3D Engine

Must be in a reasonable location and appear to be powering the drivetrain of the vehicle

Functional Transfer Case:

(-4)

Leaf Springs:

Front (-3)

Rear (-3)

Both (-7)

Multiple Drive Axles:

3 axles (-3)

4 or more (-5)

Chassis Mounted Steering Servo:

Front (-5)

Rear (Class 3 Only) (-2)

Realistic exterior items (Max. -6pts):

Items that are non-functional but you would see on a trail truck:

(-1) (-2) (-3)

(-4) (-5) (-6)

Realistic exterior items

Fuel cell, exhaust, jerry can, hubs on all wheels, steering stabilizer, disc/drum brakes on all wheels, mirrors(2), wipers(2), antenna, license plate, fire extinguisher, trail tools (Hi-lift jack, etc.) first aid, etc. -1 each

SORRCA Calculator - Under Development

This calculator is intended to assist you in calculating the scale point total for your vehicle. Calculations may vary on a local event basis.

Truck bed:

Tube bed OR Flat Bed:

Metal (-3)

Plastic (-1)

Bed mounted headache rack or roll bar:

Metal (-2)

Plastic (-1)

Truggy and Back halved truck:

Metal (-4)

Plastic (-2)

Truggy and Back Halved Truck Specifications

Tube Frame Truck (tuber):

Tuber:

Metal (-8)

Plastic (-4)

Rigid metal/plastic body panels:

(-1)

Tuber Specifications

A tuber consists of a complete body structure where the front, cab, and rear sections are comprised entirely of structural tubework. Tube bed, roll bar, internal cage, and shock mounts points not available in addition to tuber points.

Interior cage or exo-cage:

Front Seats:

Metal (-3)

Plastic (-1)

Rear Seats:

Metal (-3)

Plastic (-1)

Third Row:

Metal (-3)

Plastic (-1)

Interior cage or exo-cage

(-3 metal -1 plastic) per row of seats or area where seats would be (vehicle doesn't need an interior to get these points). Cage must have down bars and cross bars in front and behind each row. Not available to tubers.

Tube accessories:

Sliders (both sides):

Metal (-3)

Plastic (-1)

Integrated tube shock mounts (per pair):

Metal (-1)

Metal (-1)

Metal (-1)

Body:

Hard Body:

Full (-8)

Cab (-4)

Drop Bed:

(-3)

Inner Fenders:

(-1 Per Pair)

(-1 Per Pair)

Complete Custom Build Body:

Full (-4)

Cab (-2)

Complete custom built body

Must be metal or hard plastic, no lexan: full -4, Cab -2 (in addition to hard body points)

Bumpers:

Front Bumper:

Metal (-3)

Plastic (-1)

Rear Bumper:

Metal (-3)

Plastic (-1)

Stinger/Grill Guard:

(-1)

Bumpers

Must be chassis mounted and separate from the body

Exterior Roof Rack / Light Bar:

Roof Rack:

Metal (-2)

Plastic (-1)

Rooftop Light Bar:

Metal (-1)

Interior:

2D/Half Interior:

4 Seats (-3)

2 Seats/Bench (-2)

1 Seat (-1)

3D Interior:

4 Seats (-5)

2 Seats/Bench (-4)

This calculator is intended to assist you in calculating the scale point total for your vehicle.
Calculations may vary on a local event basis.